Automotive News « Back to News

Transmission Slipping Causes

It can happen to anyone at any time. You’re driving along the road and when you step on the gas, your engine hesitates, then seems to jam into gear. This is called transmission slippage. It can be a serious problem, particularly for cars with an automatic transmission. When you experience slippage, it’s vital you get the problem diagnosed and repaired right away.

While initial problems may require only a simple fix, ignoring them could ultimately lead to transmission failure, a costlier repair. Learn to watch for these transmission slipping causes and signs, and discover where you can go to get the problem taken care of before a minor issue turns into expensive repairs.

Signs of Transmission Slippage

Transmission Slipping CausesYour transmission slipping might not always be obvious. Delays in acceleration with “hard’ or “slam” shifting into gear is the most common, clear sign, but also watch for your car to show high RPMs of over 3,500, especially when you’re not driving fast. Listen for strange noises like thuds or grinding sounds. Pay attention to any unusual smells like burning. Of course, if your check engine light goes on, it could be indicating transmission issues.

Any of these symptoms can be signs that your transmission is slipping. There are a number of reasons this can happen, some of which are more major than others.

Transmission Slipping Causes

A wide range of issues can cause your transmission to slip. The most common is low transmission fluid levels. When you don’t have enough transmission fluid, your system can overheat, and it won’t produce the right level of pressure to change gears as needed.

If you have a burning smell, it can mean that your fluid is damaged from overheating. This requires a complete change in transmission fluid as well as a check for other damage. When you have worn or broken bands in your transmission, your gears become loose and don’t engage properly.

Clutches do exist in automatic transmissions, but they work differently than manual transmissions. When plates become burned or worn due to low fluid, it can cause slipping. Likewise, when your gears wear out, they slip instead of engaging properly. Finally, you can have issues with your torque converter or solenoid, both essential to feeding power to your system.

Fixing a Slipping Transmission

Transmission Slipping CausesIf your slipping problem is something simple like low or burnt fluid, you may be able to fix it by adding or changing the fluid yourself. Adding fluid is a simple process; changing it might require a bit more knowledge. If the problem is more serious, though, such as a clutch, band, solenoid, gear, or torque converter issue, it’s going to require professional help to get repaired.

Get Transmission Help at Braman Honda of Palm Beach

If you’re in the area of Palm Beach, Lake Worth, Boynton Beach, or Wellington and you experience any of the symptoms above, it’s important to call for service right away. Braman Honda of Palm Beach is here to take care of your transmission issues quickly and get you back on the road. Contact us online for an appointment today.